Related Posts
Q
enable password cisco line vty 0 15
password cisco
ntp server 192.168.1.200 maxpoll 4 minpoll 4 username admin privilege 15 password cisco no snmp-server
!
no ip routing
!
interface Vlan1 no shutdown
ip address 192.168.1.20 255.255.255.0
!
interface GigabitEthernet0/0 shutdown
no ip address
!
interface TenGigabitEthernet1/0/1
!
interface TenGigabitEthernet1/0/2
!
interface TenGigabitEthernet1/0/3
!
interface TenGigabitEthernet1/0/4
!
interface TenGigabitEthernet1/0/5
!
interface TenGigabitEthernet1/0/6
vlan 120
interface vlan 120
ip addr 192.168.120.94 255.255.255.0 exit
wireless management interface Vlan120
!
end
[0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit. Enter your selection [2]: 2 Building configuration...
Compressed configuration from 2729 bytes to 1613 bytes[OK]
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started!
NEW QUESTION: 2
How many cg1.4xlarge on-demand instances can a user run in one region without taking any limit
increase approval from AWS?
A. 0
B. 1
C. 2
D. 3
Answer: C
Explanation:
Generally AWS EC2 allows running 20 on-demand instances and 100 spot instances at a time. This limit
can be increased by requesting at https://aws.amazon.com/contact-us/ec2-request. Excluding certain
types of instances, the limit is lower than mentioned above. For cg1.4xlarge, the user can run only 2
on-demand instances at a time.
Reference: http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html#limits_ec2
NEW QUESTION: 3
優先度16384のプライマリおよびセカンダリルートスイッチの両方に壊滅的な損失が発生した場合、どのターシャリスイッチが引き継ぐことができますか？
A. 優先度4096のスイッチ
B. 優先度20480のスイッチ
C. 優先度8192のスイッチ
D. 優先度12288のスイッチ
Answer: B
